您好，在这个视频中，我们有一个孤星和三角形连接的三个电机，它是星形三快速电源，好的，一次。
Hello, in this video, we have a Lone Star and Delta connection of three motor, it's star three fast power supply, OK, one time.

然后我们需要的是，我们需要一个感应电机来让我们在这里正常工作。
And then what we need, we need an induction motor to give us OK in here.

还有一个三个电源，因为这是 Star，这是 Delta。
And also one more three power supply, because this is Star and this is Delta.

好的，现在让我们开始讨论组件并开始我们的电路。
OK, and now let's go to components and let's start our circuit.

但同样，我需要的是我的控制电路需要电源，好吗？
But again, what I need I need a power to my control circuit, OK?

然后停下来开始推杆。
And stop and start putting.

这是这里，也是在。
This is here and it's at.

这里。
Here.

好的，现在我需要一个系统接触器，这是我的继电器，用于确定我们的电路是否正在工作或不启动我们的电路。
OK, now what I need I need a system contactor for me, this is my relay to is our circuit is working or not to launch our my circuit.

我的常开联系人在这里。
My normal open contact is here.

呃，让我们编辑一下，从这里到这里，现在这将是系统接触器，这将是系统接触器常开触点，我准备好了。
Uh, let's edit OK, from here and here and now this will be system contactor and this will be system contactor normally open contact and I am ready.

所以我需要延迟计时器。
So what I need I need on delay timer.

好的，延迟计时器在这里，这里是八十二，这里是八十二。
OK, on delay timer is here, it's eighty two here and it's eighty two here.

非常好。
Very good.

现在我需要这个计时器，根据这个计时器，我还需要联系一家商店，其中一家是达美航空。
And now what I need for this timer according to this timer I need to contact also one store, one is Delta.

好吧，这是我的三角洲，这是我的明星。
OK, this is my delta and this is my star.

好的，我们从这里开始，这将是 Delta。
OK, let's say to here start and this will be Delta.

用于星形连接之前的星形连接。
For star connection before the star connection.

我需要使用我的常密联系人，好的，以及达美航空的第一个常密联系人。
I need to use my normally close contacts, OK, and first normally close contact of Delta.

如果 Delta 未激活，那么您就可以开始了。
If Delta is not active, then you start OK.

又为之。
And also for the.

像 t 0 0 之类的计时器未激活。
Timer like t zero zero is not active.

所以现在是时候了，好吧，我们需要时间进行，呃，Yielders Star 和 Delta 转换，好吧，现在我需要在这里。
So here is the time, OK, we need the time for the, uh, Yielders Star and Delta conversion, OK, and now what I need here.

好的，棒极了。
OK, very good.

同样，我在这里需要常开触点和常闭触点。
Also the similar thing that I need normally open contact and normally close contact in here.

把它放在这里，让我们现在把它放在这里和这里，我需要什么，我需要时间是活跃的和结束的，所以这将是时间零，这将是开始正常密切接触，我准备好了。
Put it to here and let's put it to here and here now, what I need, I need to time is active and finished, so this will be time zero and this will be start normally close contact and I am ready.

所以，Norm，在这里，我们还需要旋转 90 度和 90 度的三重接触。
So, Norm, in here, triple contacts that we need also to rotate and 90 degree rotate and 90 degrees in here.

让我们联系吧。
Let us connect.

电源线。
Power cables.

好的，好的，现在。
OK and OK, and now.

好的。
OK.

而且OK，所以有一个奇怪的OK，很好。
And OK, so there is a strange OK, very good.

再次，连接。
Again, connect.

一二三，OK，直到可以连接为止。
One and two and three, OK, until that you can connect are connected.

这是连接的。
This is connected.

和。
And.

他将被连接。
He is going to be connected.

好吧，但是在这里，有点奇怪，好吧，复杂，抱歉，好吧，好吧，但我正在寻找。
OK, but in here, a little bit strange, OK, complicated, sorry, OK and OK, but I'm looking.

像这样，也许吧。
Like this, maybe.

这是八次断线，因为看起来很糟糕。
It is eight disconnections because it seems very bad.

哦，这真是太糟糕了，他们放走了他们。
Oh, this is so, so bad they let them off.

再次抱歉，我会放上我的三重联系人，因为它显示得非常非常非常糟糕，好吗？
I'm sorry again, I will put my triple contacts because it's showed very, very, very bad like this, OK?

现在我需要旋转它。
And now I need to rotate it.

听到。
To hear.

将它们一一连接起来。
Connect them all one by one.

最好这样说就OK了。
It is better to put it OK like this.

嗯，只要几秒钟，就完成了。
Um, just in seconds, it will be finished.

好的。
OK.

连接到这里就OK了。
It is connected to here and OK.

好吧，现在这将是一个开始，这将是 Delta 连接，它的开始，我将为您介绍我的系统。
And OK, now this will be a start and this will be Delta connection and it's start, I will give you a start to my system.

现在你可以看到故事是相连的，三角洲突然因为火灾而发生，因为这里没有时间。
Now you can see stories connected and suddenly Delta because of fire, because there is no time in here.

想象一下七秒钟后，好吧，商店将关闭，三角洲将再次开放。
Imagine seven seconds later, OK, the store will be closed and the delta will be opened again.

一、二、三、四、五、六、七开始，呃，转动。
One, two, three and four and five and six and seven start, uh, turning.

然后达美航空会运行一段时间，直到定价停止为止。
And then Delta is running for a moment and it will be run until stop is priced.

再次启动，确定，开始连接。
And again, start OK, start connection.

电机现在正在运行。
The motor is running now.

电机正在抽签，电机正转，然后启动关闭，三角形打开。
The motor is taking taking the lot and the motor is turning forward and then start is closed and the delta is open.

这就是开始和三角形连接。
So this is the start and delta connection.

但是，呃，对于正确的接线图，您会看到一个父亲始终在应用，并且启动正在应用，然后 Delta 正在应用，然后您将看到接触器的另一种连接类型。
But, uh, for the right wiring diagram, you will see one father is always apply and the start is applying and then Delta is applying and then you will see another connection type of the contactors.

但这只是一种耻辱，好吗？
But this is just a shame, OK?

这是一个令人羞愧的图表，它无法正常工作，或者我们正在学习它，您可以在这里看到它停止和开始。
This is a shame diagram and it's not working correctly or not that we are learning it and you can see it in here stopped and started.

那么这就是我们如何在 T 中创建强大的 Delta 连接作为模拟器软件？
So this is how can we, uh, create a strong Delta connection in T as software for simulator?

我已经完成这个视频了。
I'm finished for this video.

下一个视频见。
See you in the next video.